How do you install a universal hardware commercial door closer?

When installing a parallel arm closer, the body of the closer is mounted onto the push side of the door and the closer arm is installed onto the frame. When the door is closed, the arm's position is parallel with the top of the frame, which is the reason it is called a “parallel” arm closer.

What are the parts of a door knob assembly called?

The components of a lockset can include (but are not limited to) the door handles (commonly both inside and outside), latch bolt, dead bolt, face plate, strike plate, escutcheon, thumbturn, push button, turn button, and other trim.

How do you install a universal hardware door handle?

When discussing door hardware, a "strike" or "door strike," refers to the metal plate or assembly that's installed into or onto a door frame to "catch" the latch or bolt to hold the door closed. You've seen thousands, maybe millions, of door strikes in your lifetime.

How do I install universal hardware?

A strike plate is the metal piece attached to the door jamb. As the door closes, the latch mechanism strikes the plate mounted to the jamb and the strike plate catches the mechanism and holds the door closed.

What is a parallel arm door closer?

EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel arm installation.

How do you fit a door closer to an outward opening door?

Parallel Arm Brackets Most manufacturers supply a regular arm with an additional piece of hardware that converts it to a parallel arm. This piece of auxiliary hardware can be called a parallel arm bracket, a parallel arm shoe, a PA bracket, a PA attachment, a soffit plate and much more.

What are the parts of a lockset?

Try a few felt pads. Just stick a few small felt pads along the edge of the doorframe: Position a pad at the top and bottom of the frame, along with two more pads at the top and bottom of the strike plate. The pads provide just enough soft cushioning to slow down the door as it closes, preventing a slam.

What is a door striker?

The "arm" (tail) rests against the door, and a spring that is twisted by the user opening the door closes the door by returning to its pre-twisted shape. This type of door closer is referred to as a "tail" spring and is one of the more simple mechanisms, having no damping control.

What are the metal things on doors called?

Closers should be mounted on the interior side of exterior doors, and for interior doors the closer should be mounted on the side of the door that is least exposed to public view. A parallel arm closer is mounted on the push side of the door, and the arm is parallel to the frame when the door is closed.

How do you install a ball knob?

Door closers can be classified in one of 6 different closer force “sizes”, as shown in the chart to the right. Most closers are adjustable, but the most common are a size 4 for an external 36 inch wide commercial door, and a size 3 for an internal commercial or residential application.

Universal Hardware Parts