Free download 2017 MPPS V21 & MPPS V18 driver and software here!

MPPS V21 software download FREE on Mega:

https://mega.nz/#!9CAFhTpD!NRtyud2wia9n7-XSOnxTCvtDf69re1oT7V2SlnioqyU

MPPS V18 download on Mega:

https://mega.nz/#!9Dpg3JwL!PFVR8bbMhC8HaDhBE075IP8iryOdbHDk3kkBNqmShiw

both versions have features below:

Crack version

No need pass

Tested without issues

Safe to use

So, 100% working on MPPS hardware v21 & hardware v18:

MPPS V18 V21 printed circuited board:

Only PCB versions above can works with mpps software mega links here

You can buy MPPS device from http://www.fobdii.com or other vendors, but please make sure of the PCB design.

Mpps sw: v21 /sw: v18.12.3.8 + fw: v1.08.21= reading / writing ecu(TRICORE + MULTIBOOT) + checksum

MPPS V21 V18 Windows 7 OK, but WIN XP, WIN 8, WIN 10 needs luck:

MPPS V21 V18 Windows XP:

• my main setup winxp :>
• working on Windows xp…..i don’t think so
• definitely not driver issue using same driver version as v16

it’s .exe on win xp is no longer supported

MPPS V21 Windows 7:

• Windows XP not supported, WIN7 or WIN10 32 or 64 BITS OK.
• In widows 7 Ultimate 64bits, work ok.
• As for XP, works Perfect win 7 etc, just buy a cheap win 7. or 8 notebook “overspeed” , not worth it, say you did find a way on xp, is it worth risk writing ecu, risk enough we guinea pig clones as it is, lets just not reinvent the wheel, if its meant for win 7, etc, im happy to comply. have to admit quite like XP so had to invest in a cheap laptop for this mpps 18 testing,
• Be sure to run as administrator using windows 7, mpps, if not, will id, but not read etc, as i witnessed yesterday, assumed tool. today read edc16 partner 1.6hdi and marelli corsa 1.3cdti and wrote ok,

NOTE: professional engineers at eobdtool tested mpps v18 clone software without issues on Windows 7 32bit

 Mpps V21  v18 Windows 8:

• Tested BMW EDC16C31 , read/write OK from windows 8 64bit

• Does not run with Windows 8 x64

Mpps V21 v18 Windows 10:

• It works good in win 8 and win 10 both x64, software will only start when cable gets power from car.

• windows 10 32 and 64 wish it worked on xp still tho ..

Mpps v21 v18 Reviews:

MPPS  clone & Opel

Opel – EDC16C9/39, PSG16 via CAN OBD read and write ok

Opel Corsa marelli 1.3cdti OK (Be sure to run as administrator using windows 7)

Read and write Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO) via OBD (CAN) OK

MJD 6JF Fiat/Opel micro+ eeprom R/W OBD – K line (MPC555+95320) OK

Opel Signum PSG16 2.2CDTI read as a Zafira by OBD all OK

Opel Astra 2.0 16V CDTI BOSCH PSG16It auto checksum and read/write OK

Opel 602/3 full read/write Micro, Flash, EEPROM, via k-line & CAN ok

Opel 603 full R/W Micro, Flash, EEPROM, via k-line & CAN ok

Opel 6JO full read/write Micro & EEPROM, OK via k-line (CAN)

clone MPPS v18 & PSA

Tested with PSA MEV17.4 TC1766 Read/Write via Boot Mode okay, used pinouts from Fgtech galletto documentation.

Read and write EDC16 Peugeot Partner 1.6hdi OK (Be sure to run as administrator using windows 7)

PSA 207 EDC16C34 Can R/W ok and Ducato EDC16C39 R/W ok

Mpps china clone & others

Read and write Land Rover TD5, tricore read and write EDC17C10 and unlock Siemens PCR2.1ECU successfully

Ford – SID206 read and write OK

Tested BMW EDC16C31, read/write OK from windows 8 64bit

Tested EDC15P boot mode (recovery) and k-line read and write, 100% no problems

Med17.x.x works no problem. It’s working perfectly. All modules are open including tricore.

Read a Bosch ME7.9.10 from Fiat Punto T-JET 1.4 turbo via OBD with multiboot function … This tool is the only one that can read this ECU from OBD

Test mpps v18 clone with PSG16 read/write flash, Works fine. Real direct to the pump,write for obd

…

in sum, MPPS cable is good at  M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic, etc… working on controllers with the tricore processor  and Marelli ECU.