字體:小 中 大 | |
|
|
2016/06/30 16:27:51瀏覽30|回應0|推薦0 | |
The newest XPROG-M v5.60 with USB dongle has been tested successfully now, and first released at obd2sale.com. Here is the Xprog v5.6 software installation instruction on Windows 7 32 bit. Software version: V5.6.0 Operating System: Windows XP/ Windows 7 32-bit Note: XPROG v5.6 software can not be used with older Xprog-m firmware. It only can work with XPROG v5.6 ecu programmer. No anti-virus program. No software update. Preparation: Open DVD disk (E:) Copy XPROG 5.6.0 zip file to Desktop Extract XPROG 5.6.0 zip file on Desktop and open the folder Part 1 – Install Adobe Reader XI Open XP 5.6.0 folder-> AdbeRdr11000_zh_CN application Preparation steup… Click Next Auto install, click Install Installing Adobe Reader XI… Adobe Reader XI installation success. Click Finish Part 2 – Install Registry Editor Open XP 5.6.0 folder-> Registry Editor2 Yes to continue Keys and values have been successfully added to the registry. Click OK Part 3 – Install driver software and computer management setup Copy XPROGBOX 5.60 English from E:/XP 5.6.0 folder to local disk C: Prompt: installing device driver software…(in the button menu column) Click the prompt info and click Close Prompt: Device driver software was not successfully installed Click the prompt info and click Close Open Computer Management Select Device Manager-> XPROG-BOX Right click for Update Driver Software… Browse my computer for driver software manually Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP Then OK.. Next Install this driver software anyway Windows has succesfully updated your device software. Click Close Back to Computer Management Select Device Manager-> Other Device-> USB Serial Port Right click for Update Driver Software… Browse my computer for driver software manually Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP Then OK.. Next Install this driver software anyway Windows has successfully updated your device software for XPROG-BOX programmer (COM4). Click Close Then you will see Ports (COM & LPT)-> XPROG-box programmer (COM4) Select Device Manager-> Human Interface Device-> USB Input Device Part 4 – Read and Write AT93C66 with XPROG V5.60 Open local disk C:-> XPROG-BOX 5.60English-> XprogDesktop application Accept the agreement Click Device Select Serial EEPROM/ Atmel/ AT93C66 Click New, then Read &nbnbsp; Click Write to write file to the device Close NONAME2 and NOT save changes to NONAME2 Again, click New, then Read Close NONAME2 and NOT save changes to NONAME2 Again, click New, then Read Close NONAME2 and NOT save changes to NONAME2 Send XprogDesktop application to Desktop to use for convenience |
|
( 知識學習|其他 ) |