SKP1000 tablet program Peugeot 308 2015 remote via OBD and during this procedure it needs to obtain the pin code with Xhorse VVDI2 PSA tool.

Step 1: read Peugeot 308 pin code before going to the IMMO.

To Auto Key Programmer Peugeot 308 remote and Citroen remote, you are required to input pin code.

Peugeot 308 remote basic info:

Frequency: 433MHZ

electronic 46 chip

After the chip is programmed successfully, the remote control automatically generates.

Peugeot 308 OBD location:

To obtain Peugeot 308 pin code in 3 methods:

Option 1. Turn to the 4S shop/ service center for help, or find out the pin code in the password card. This way is reliable and not expensive.

Option 2. Calculate the pin code by reading out the Body ECU or BSI data. To the unprofessional users, this way is not easy and something risky to remove the ECU and BSI.

Option 3. Use a machine to read the pin code. Here I use Xhorse VVDI2 PSA tool.

Guide:

Open VVDI2 PSA tool, click on “Peugeot”

Click on “Read Pin code” and it pops up “Turn on ignition”.

Read out pin code successfully and to program remote.

Step 2: SKP1000 Tablet Program Peugeot 308 2015 remote.

Tap “Peugeot” then “Via car model”, then “308”

Please choose: OBDII port and turn on the ignition, “Yes” to continue, “No” to back.

Enter the pin code read out by VVDI2 PSA tool

Close all car doors and the trunk, tap “Yes” to continue.

Turn off the ignition, then turn on the ignition, tap “Yes” to continue.

SKP1000 Tablet program Peugeot 308 remote successfully, if you want to program the next key? tap “Yes” to continue and “NO” to back.

The remote will generate automatically, if it doesn’t work, turn the ignition to the ON position, then press the remote button for two times.

That’s all.