網路城邦
上一篇 回創作列表 下一篇   字體:
Common problems when customizing silicone products
2022/08/29 14:43:03瀏覽118|回應0|推薦0

With the rapid development of the times, peoples concepts also need to keep up with the pace of the times. Now silicone products are recognized by more and more people. So, what are the common problems when custom silicone products ?


There is a burr on the edge of the silicone product, what should I do?

"There is a burr on the edge of the silicone product, what should I do?". The quality of the product is an important factor that determines whether it can quickly occupy the market. It is also a necessary condition for a company to truly survive. As a silicone product factory, the products produced should not have details such as peaks, burrs, and lack of materials.


2 colors on one silicone product?

For such silicone products, it can be produced as early as a few years ago, but few manufacturers will make such products, and they need two sets of molds to produce one product. Compared with one set of molds, it is much more difficult to produce. The cost also increases a lot. However, different products are somewhat different when they are produced.


How to judge the quality of silicone products?

Silicone products have problems such as burrs or peaks. In addition to the fact that the product itself is not well rested, it is also closely related to the self-detachment of the mold. Therefore, whether the mold is well done or not will directly affect the quality of the silicone product.




( 休閒生活生活情報 )
回應 推薦文章 列印 加入我的文摘
上一篇 回創作列表 下一篇

引用
引用網址:https://classic-blog.udn.com/article/trackback.jsp?uid=lorelle&aid=176968003