字體：小 中 大 |
|
|
|
| 2017/09/18 17:34:43瀏覽118｜回應0｜推薦0 | |
| There is special compressed gas cylinders used to store cryogenic gases. Cryogenic cylinders are mostly thermally insulated ones. These containers are specially designed according to the characteristics of the matter it contains. These canisters are capable of bearing extreme vacuum tea flask and rapid temperatures. However, in case you are wondering, there are different types of such containers which come in different shapes and sizes. Here are some of the most popular types: Liquid containers: These containers are pressurized vacuum insulated containers. They are specially designed for the substance being contained double wall thermo flask and are currently the most economical way of storage. They are also easy to transport, dispense and use in comparison to the other types of containers for this matter. Liquid containers have valves through which the liquid is filled into and dispensed. There are also pressure control valves on the canister with a bursting disk for safety purposes. In general, there are three types of liquid containers available only liquid containers, simple containers and complex containers. Dewar Flasks: These flasks were invented back in 1892 by Sir James Dewar and were named after him. Dewar Flasks are basically containers that are not pressurized, but rather have vacuum jacket vessels. There is a cap on top of the container which impedes air and moisture to enter the thermos vacuum bottles. These flasks are also known as vacuum flasks and they allow extreme pressure into the vent. The vacuum present in these containers is used for thermal insulation. Whatever is stored inside these flasks is kept in a non-vacuumed condition. These flasks are considered best for maintaining the temperature of the constituent. This is the major characteristic of the Dewar flask, which is one of the reasons behind this container's enormous popularity. When hydrogen, oxygen, argon, and others are stored in these flasks, an outer vessel of liquid nitrogen is attached to it for insulation purposes. These flasks are available in different sizes and types. The most popular type of Dewar flask is the liquid Dewar flask. This type does not have caps or lids. It has a wide mouth opening and is small in size, which is why it is mainly used in laboratories for storage purposes. Tanks: Tanks are the largest containers among all types. They are double-walled and are insulated for storage purposes. These containers come in spherical shapes and are widely used for storage purposes. Their capacity can range from gallons to barrels thermos water bottle and even more. Although they are huge, mounting them on fixed locations is easy. Tanks are sturdy, and therefore are the best way of storing matter securely. They can be mounted in truck chassis, railroad cars and stationary vessels. This indicates that they are easier to transport from one place to another. Tanks usually are pressurized at a standard pressure. The temperature within the tanks is neither too high nor too low. There are safety relieve valves located between the inner and outer surface for the protection of the tanks. Lastly, between the outer and inner surface there is some space left which works as a vacuum. http://www.wmwaterbottle.com/html/en/Products/Vacuum-Flask/thermos-water-bottle.html |
|
| ( 創作｜散文 ) |
