Tutorial: How to set up and connect Topdon Rlink X3 J2534 adapter with Chrysler OEM software (wiTech 2.0).

Tips: You need to install the Chrysler OEM software before use. If it’s not installed yet, you can download and install it from the official Chrysler website.
https://www.mopartsp.com/login

1. Open the RLink Platform. Clicking “Login to the Account” will automatically redirect you to the login page. Log in to the account bound to the RLink X3 device.
Note: After binding and activating the device and downloading the driver, you can use the RLink X3 device to perform vehicle diagnostics without opening the RLink Platform later.

2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.

3. Click Driver > Driver Download. Click CHRYSLER and click Download to download the driver.
Note: Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.

4. Click Driver > Driver Info. Then click CHRYSLER to check the driver mode.

5. When using RLink X3 devices, select RLink as the diagnostic interface on the OEM software. If you are connecting to the original VCI or third-party VCI, open the OEM software and select the original VCI or third-party VCI as the diagnostic interface. This driver will not have any impact.

6. Double click the icon to open the wiTECH 2.0. Click Connect > Device. Then click Non Verified J2534 Device and choose TOPDON – RLink.

7. Log in to the wiTECH2 account registered on the CHRYSLER official website. Choose wiTECH2 AM PROD to start vehicle diagnostics and vehicle faults reading.

www.topdonshop.eu