字體：小 中 大 |
|
|
|
| 2017/08/02 00:01:13瀏覽75｜回應0｜推薦0 | |
| 標題: B+W cpl filter 發問: 請問B+W MRC Slim CPL 和B+W Slim CPL 分別 MRC 有什麼用? 廣角鏡用 最佳解答:
此文章來自奇摩知識+如有不便請留言告知 MRC-Coating _____ Multi Resistant Coating The acronym "MRC" stands for "Multi Resistant Coating". The lens coating normally used for B+W photographic filters and certain SCHNEIDER lenses is resistant in several respects: for one thing, to the influence of dust and moisture, for another, it offers a significantly higher resistance to mechanical scratches on the surface of the lens. The cleaning of filters with this hard, water-repellant system of coatings has become altogether considerably easier. 圖片參考：http://www.schneiderkreuznach.com/knowhow/im_mrc/mrc.gif The illustration at the right shows a prepared filter which has been moistened; the one half is coated with the traditional MC coating, and the other half with the new coating design MRC. It is quite evident: the water droplets do not stick on the MRC coating (at the right). The broad-band anti-reflection coating MRC is produced by a plasma-supported condensation-deposit process. In this process, the accelerated inert-gas ions condense the material deposited as very compact and resistant layers. The uppermost layer consists of fluorinated Siloxan. Each side of the filter consists of a system of eight interference layers, i.e., sixteen layers per filter in all, with a total thickness of about 250 nm! This corresponds to a thickness of ? μm! The uppermost layer has low surface energy, which is to say low surface tension; this results in a high wetting angle of contact, e.g., against water, of about 120°. This phenomenon is similar to a drop of mercury on a piece of glass. It is in this low surface tension that the physical secret lies, namely, why the new MRC coating considerably inhibits the adhesion of moisture.其他解答: |
|
| ( 知識學習｜商業管理 ) |
